Latest News and updates

[18 Sep, 2017]

On-line system for a Recovery boiler

Work started for on-line calculation system in a spanish recovery boiler. Main purpose of the system is to control boiler on-load cleaning.

[1 Jun, 2017]

Improved link to Excel

Development work: transferring all calculation results into Excel cells:

[23 May, 2017]

Development work for next Prosim version 5.1x. started

In the first development project for the next version improved link to Ms-Excel will be created.

[20 Apr, 2017]

Endat sulautuu Clyde Bergeman Scandinavia Oy:hyn

Kirje asiakkaille ja yhteistyökumppaneille:

[20 Apr, 2017]

Endat will be merged into Clyde Bergeman Scandinavia Oy

Notification to our customers and co-operation partners:

[30 Mar, 2017]

Delivery of Prosim version 5.14. started

Prosim-version (5.14) includes following new features:

  • Support for AutoCad 2016 and 2017
  • Support for Windows 10
  • New module for kraft pulp mill calculation (ECF bleaching)
  • New module for WFGD (Wet Flue Gas Desufurization)
  • Updates for features of several modules

[5 Jan, 2017]

Prosim version 5.14. testing started

Next Prosim-version (5.14) is planned to include at least following new features:

  • Support for AutoCad 2017
  • Support for Windows 10
  • New module for kraft pulp mill calculation (please see input screen below)
  • New module for WFGD (Wet Flue Gas Desufurization)
  • Updates for features of several modules

[21 Dec, 2016]

WFGD, Wet Flue Gas Desulfurization

Wet Flue Gas Desulfurization module is under construction. WFGD-module will be available in the next Prosim version.

[10 Jun, 2016]

Example of a kraft pulp mill simulation model

[7 Jun, 2016]

Kraft pulp mill calculation

Kraft pulp mill calculation integration into Prosim started. Mill simulation includes main sections: cooking + fiber line (ECF bleaching), evaporation, recovery boiler, causticizing etc.

[25 May, 2016]

New Prosim version tested with AutoCad 2017

Prosim 5.14 test runs finalized successfully with AutoCad 2017

[15 Jan, 2016]

Endat has moved to new office

Endat Oy has moved to new office with Clyde Bergemann Scandinavia Oy.

[27 Aug, 2015]

Delivery of Prosim version 5.12. started

Prosim-version (5.12) includes following new features:

  • Support for AutoCad 2015
  • Support for Windows 8 and 8.1
  • New modules and features especially made for recovery boiler calculations.

[13 May, 2015]

On-line monitoring for kraft recovery boilers

On-line monitoring for recovery boilers is now available. Monitoring heatexchanger fouling, boiler mass- and heat balances. Automated and optimized boiler cleaning is included. In the combustion can be included: black liquor, oil, gases, soap, sludge,...

[13 May, 2015]

On-line valvonta soodakattiloille

Soodakattilan on-line-valvonta on valmistunut. Valvontaan sisältyy mm. lämmönvaihtimien likaantumisen seuranta, kattilan massa- ja energiataseet. Polton mallinnuksessa voi olla mukana mm. seuraavia polttoaineita: mustalipeä, öljyt, kaasut, suopa, liete. On-line valvonta mahdollistaa koko voimalaitoksen kunnontarkkailun sisältäen mm. turbiinit, esilämmittimet, puhaltimet ja pumput sekä kuorikattilan. Kuorikattilan taseista voidaan laskea kiinteän polttoaineen kosteus- ja lämpöarvo. Järjestelmä ohjaa kattiloiden nuohousta automaattisesti ja optimaalisesti.

[26 Mar, 2015]

Further development for recovery boiler calculation started

Existing recovery boiler calculation will be updated for more flexible fuel handling and other features requested by new Prosim-users.

[19 Jan, 2015]

Work for Prosim version 5.12. started

Next Prosim-version (5.12) is planned to include at least following new features:

  • Support for AutoCad 2015
  • Support for Windows 8 and 8.1
  • Updates for features of several modules

[20 Mar, 2014]

Delivery of the new Prosim version 5.10. started

Delivery of the new Prosim-version has started. Biggest new features in this new version are:

  • Support for AutoCad 2014 (and 2013)
  • New modules: Pulverizer(mill), Silo
  • Updates for features of several modules

[30 Aug, 2013]

Prosim for AutoCad 2014 available

Prosim-version 5.9 runs under AutoCad 2014. This version is for customers needing version for AutoCad 2014 before Prosim version 5.10 is ready.

[18 Jun, 2013]

Work for Prosim version 5.10. started

Next Prosim-version (5.10) is planned to include at least following new features:

  • Support for AutoCad 2013 and 2014
  • New modules: Pulverizer (mill)
  • Updates for features of several modules

[5 Nov, 2012]

Älykäs nuohous

Endat Oy:n älykäs nuohous -artikkeli Promaint-lehdessä. älykäs_nuohous

[15 May, 2012]

Delivery of the new Prosim version 5.8. started

Delivery of the new Prosim-version has started.

[28 Oct, 2010]

Work for Prosim version 5.8. started

Next Prosim-version (5.8) is planned to include at least following new features:

  • New modules: once-through furnace, supersonic steam nozzle, heatexchanger for ash cooling using air as cooling media.
  • Optimization of input parameters. This feature is can be used for example to seek values for module parameters the way they fulfill selected target values. Example: What should be solid fuel moisture and heating value to get closest values for measured values: flue gas moisture, air flow, flue gas temperature before the economizer?
  • Updates for features of several modules (Economizer, Simplified boiler, Copy)
  • Support for AutoCad 2010 and 2011

[22 Oct, 2010]

Endat moved to new office

Endat Ltd moved to new office in Espoo. New address is Tekniikantie 2 02150 Espoo.

[16 Nov, 2009]

Several projects for on-line process calculation systems under construction

Year 2009 has been busy in Endat ltd in building on-line process calculation systems. This year Endat has received seven orders for on-line systems delivered into Smartboiler system being supplied by Foster Wheeler Energy Ltd. Two systems are delivered to Finland, two systems to Sweden, one to Poland, one to Russia and one to Belgium.

[18 Sep, 2009]

Annual Prosim sailing was arranged 15'th and 17'th of September

Weather was good: in the second day vessel speed exceeded 10 knots. This is a new record in Prosim sailing. Endat wish to thank all participants.

[9 Feb, 2009]

Delivery of the new Prosim version started

Delivery of the version 5.6 started. Biggest new features in this new version are:

  • New steam/water tables IAPWS-IF97 (1997,2005). New functions improve calculation close to the critical point and in supercritical pressures.
  • Oxyfuel-calculation. Enables simulation, where carbon dioxide can be condensated out from flue gases. New air distillation module added to Prosim.
  • Calculation program is updated. In the new version calculation is much faster than earlier.
  • Support for Vindows-Vista
  • Support for AutoCad 2008 and 2009.

[9 Feb, 2009]

Delivery of the new Prosim version started

Delivery of the version 5.6 started. Biggest new features in this new version are:

  • New steam/water tables IAPWS-IF97 (1997,2005). New functions improve calculation close to the critical point and in supercritical pressures.
  • Oxyfuel-calculation. Enables simulation, where carbon dioxide can be condensated out from flue gases. New air distillation module added to Prosim.
  • Calculation program is updated. In the new version calculation is much faster than earlier.
  • Support for Vindows-Vista
  • Support for AutoCad 2008 and 2009.

[10 Dec, 2008]

Testing of the new version started

Prosin version 5.6 testing started. Testing is excpected to be ready in December 2008.

[8 Aug, 2008]

Prosim user day will be arranged in Espoo, Finland

Prosim day for users will be arranged in August 2008. Day includes introduction of new coming Prosim version 5.6 and sailing. Day starts in Endat's premises in Espoo and continues close to Espoo and Helsinki on 44 feet yacht. Prosim users are awaited to suggest suitable days.

[3 Oct, 2007]

On-line TDM-system project to Spain

On-line Thermo Dynamic Modeling system for power plant in north Spain is almost finished. Endat's process simulation system is a part of Clyde Bergemann system delivery to a tower type once trough boiler fired with bitumous coal. Process calculation is made for the whole steam cycle.

[25 Sep, 2007]

Project for on-line process calculation system to Holland under construction

Calculation system will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd.

[24 Jul, 2007]

Work for Prosim version 5.6. started

Next Prosim-version (5.6) is planned to include at least following new features:

  • Updated steam tables offer faster calculation and more accuracy close to the critical point.
  • Possibility to model oxyfuel combustion processes including air distillation

[1 Jun, 2007]

New owner for Endat Oy

Clyde Bergemann GmbH has acquired 100% of the Endat Oy. Please see the letter to our clients:

Letter to clients

Kirje asiakkaille

Additional information of Clyde Bergemann.

[9 May, 2007]

Prosim version 5.4. delivery started

Testing of new Prosim 5.4 is now ready. Delivery of the version started. Biggest new features in this new version are:

  • Possibility to build fast regression models describing Prosim process models. Model can be transferred to Excel automatically.
  • Pump curves for more accurate pump simulation -using manufacturers curves
  • Curves to define accurately fan simulation in different loads. User can give manufacturers curves.
  • New module for simplified boiler calculation including soot blowing, steam coolers and SO2-reduction.
  • Support for AutoCad 2007 (and 2006)

[8 Feb, 2007]

Prosim version 5.4. testing started

Testing period is started for the new Prosim-version. Delivery of the new version is planned to start in March.

[9 Jan, 2007]

New Project for on-line system to Finland started

System will be delivered for BFB-boiler burning peat and bio-fuel. Delivery will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd.

[15 Dec, 2006]

Project for on-line system to Italy started

Delivery will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd. CFB-boiler burns RDF fuel.

[7 Nov, 2006]

New project for on-line system to England started

Delivery will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd. BFB-boiler is biomass-fueled.

[23 Oct, 2006]

New Prosim version 5.4 is under construction

Next Prosim-version (5.4) is planned to include at least following new features:

  • Pump curves for more accurate pump simulation. (using manufacturers curves)
  • Curves to define accurately fan simulation in different loads. (manufacturers curves)
  • Possibility to build fast regression models describing Prosim process models. Model can be transferred to Excel automaticly.

[18 Aug, 2006]

Annual Prosim sailing was arranged 17'th of August

The crew members came from Vattenfall, Jaakko Pöyry Forest Industustry and Endat. Weather was good: wind more than 10 m/s and sun was shining. Endat wish to thank all participants. Other sailing day for our clients will be arranged in the next week.

[10 Mar, 2006]

Prosim 5.2 runs now in AutoCad 2006

Current Prosim version 5.2 runs now under AutoCad 2006 too.

[3 Mar, 2006]

Endat moved to new office and started new co-operation

Endat Ltd moved to new office in Technopolis Innopoli in Espoo and started collaboration is the same premises with SciTech-Service Ltd and with Glocell Ltd. New office for three companies are called Consult Corner and it offers more room for Endat.

[28 Nov, 2005]

New project for on-line system to Austria started

Delivery will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd. Boiler includes reheat and it is fired by bio fuel. Delivery of the on-line system is scheduled to be in the first quarter of year 2006.

[17 Oct, 2005]

New project for on-line system to Germany started

This system will be very similar as delivered earlier to Germany. Delivery will be part of Smartboiler system being supplied by Foster Wheeler Energy Ltd.

[9 Sep, 2005]

Training course for Syrian experts completed

Endat had the pleasure to arrange three weeks training for twelve energy experts from Syrian Arab Republic.
The course focused mainly on condition monitoring of thermal power plants including performance calculations and simulations of different types of power plants. Lectures of vibration monitoring and other related tasks were given too.

Endat wish to thank all lecturers, hosts of our visits and our Syrian quests.

[11 Aug, 2005]

Endat's profile on Power Technology www-sites

Endat's new profile is now published on Power Technology sites. Power Plant Simulation Software profile on Power Technology

[23 May, 2005]

Delivery of Prosim 5.2 started

Prosim-version 5.2 is finally ready. Most important new features are:

  • Possibility to use multiple simultaneous regulations
  • Improvments to batch run: possibility to use module parameters
  • More accuracy to simulation of humid air in burning
  • Support for AutoCad 2005
  • New flexible installation routine

[11 Mar, 2005]

New projects for two on-line systems to Germany started

These systems will be similar to those delivered earlier to Germany. The new ProsimCMS systems will be installed at two power plants, where boiler plants are being supplied by Foster Wheeler Energy Ltd.

Copyright 2017 Endat Oy